An easy, no-cost credit
Like the similar credit, IEQc4.1: Low-Emitting Materials: Adhesives and Sealants, it shouldn’t cost you anything extra to earn this credit—it will just take some work. Your first priority should be to specify only paints and coatings that comply with the credit’s VOC limits, and enforce those specifications on the jobsite. Research low-VOC paints and coatings before construction begins and provide lists of acceptable materials to contractors to help ensure that the right products are used.
Performance should not be an issue
Major manufacturers offer paints and coatings that are just as durable and perform just as well as their higher-VOC…
Verify Your Information
Don’t allow the use of products that merely claim to be “low VOC.” Everyone specifying and purchasing products must actually find the products’ VOC content in grams per liter (g/L), which is usually found on the product’s technical data sheet or material safety data sheet, and compare that number with VOC limits listed for different uses determined by the South Coast Air Quality Management District (SCAQMD) Rule #1113 and Green Seal GS-11 and GS-03.
Only 20% of product cut sheets selected at random need to be uploaded to LEED Online to document this credit although it is best to keep all product cut sheets on file in case the credit is audited.
•John P. Lapotaire, CIEC •Certified Indoor Environmental Consultant •Microshield Environmental Services, LLC •www.Microshield-ES.com
#microshield #IESO #FloridaDBPR #Chapter468 #indoorairquality #SenateBill2234 #mold #IEQ32 #SB2214 #LEED #DepartmentofBusinessandProfessionalRegulation #moldpretreatment #MoldRelatedServicesLicensingProgram #HB4171 #moldtesting #moldprevention #IndoorEnvironmentalStandardOrganization #healthyhome #USGBC #ResidentialMoldAssessment #FloridaStatutes #moldinspection #moldremoval #moldremediation #ASTM #johnlapotaire #newhomemold #PartXVI #JohnPLapotaire #HouseBill713 #ciec #airquality
Comments